The lube with proper viscosity is necessary before reduction gears is put into operation, reduction gears can give full play to its funtion when making gears less friction, meeting high load and shocking load

It is necessary to drain off the lube after it is used about 200 hours for the first use, then fill lube to a height of middle of oil leveler after it is rinsed thoroughly, but higher location or lower location can cause higher temperature

( Please refer to manual of operation, and Mantenance for detailed operation process )

The types recommended:

Ludrication type	Oil				Grease	Special Lubricants
Ambient Temperature℃	+40 to 0	+25 to -15	+10 to -30	-20 to -50	+40 to -15	-40 to +80	-40 to +10
ISO viscosity class	VG220	VG 150 VG 100	VG68-46 VG32	VG 22 VG 15		VG220	VG32
	BP Energol GR-XP220	BP Energol GR-XP100	BP Energol GR-XP68	BP Energol LPT22	BP Energrease  HT-EP 00
	Mobilgear 630	Mobilgear 629	Mobil D.T.E 15M	Mobil D.T.E 11M	Mobilplex 44	Mobil SHC 630	Mobil SHC 624
	Shell Omala Oil 220	Shell Omala Oil 100	Shell Tellus Oil T32	Aero Shell Fluid 41	Shell Grease S 3655